Any questions? Please ask!

Industrial mesh:

Process belts:


Or use our:
Contact form

Industrial mesh

Plain dutch weave (PDW): slightly increased strength

Plain dutch weave

When compared with square, oblong or broad weave meshes, plain dutch weaves offer increased mechanical strength for industrial filtration.

Thanks to their closed surface, filtration occurs at the point where warp and weft join. Dutch weave is manufactured in plain weave pattern (1/1), whereby the warp wires are interwoven with a wider pitch than the weft wires. This significantly increases the strength of the mesh in comparison with square meshes.

The absolute aperture of the fabric is 45 µm to 300 µm.
GKD carries stock of plain dutch weave with these absolute openings made from 1.4301, 1.4401 and 1.4539 stainless steel, which cover the majority of meshes required in the field of industrial filtration.

Filter applications:

  • Drum filters
  • Nutsche filters
  • Cartridge filters
  • Vertical pressure leaf filters
  • Mesh pore size > 45 µm

Do you need advice or more info?

Then contact a GKD specialist now.

+49 (0) 2421 803 0

Write e-mail

Other topics


Log in to see additional content

If you do not yet have access to the GKD-Infocenter, please set up a user account. Due to our new website, it is necessary that users with an existing account register again.

Register now
Forgot password?
Write to us with your question or comment on the topic of Plain dutch weave and we will get back to you shortly.